SNRC 120022 R3-CR 1 / 10 standard carbon fiber center electric house frame 4WD (pre sale)
1.DOUBLE SIDE MID-MOTOR MOUNT
The Mid Motor mount merges with spur gear mount in a single piece with narrow space between two mounts that allow the electronic equipment installed at center to reduce extra steering momentum move when in steering.
2.MID-MOTOR TWISTING CONTROL
The Mid Motor mount design is merged with spur gear mount in a single piece with narrow space between two mounts, so it can prevent the belt slip off when twisting in the steering.
3.BI-DIRECTION MOTOR INSTALLATION
The chassis and the mid Motor mount design can allow the motor to be installed at both side to adapt different traction conditions and layouts. Besides, it is installed at center to ensure the chassis twisting is symmetrical in both sides.
4.ANTI-ROLL BAR LEVER SHAFT
The new kind of Anti-Roll Bar Lever Shaft is made of S2 spring steel material that provide better strength and is installed lower in the chassis in turn to lower the chassis gravity and reduce the car traction rolling for better stability.
5.SEPARATED SUSPENSION MOUNT
The separated suspension mount is made of 6061 T6 material with option 0.5mm or 1mm thickness selection. For different thickness suspension mount can vary the car traction rolling in different tract condition.
6.SHORTER SHOCK DAMPER
It comes with shorter shock with body diameter 13mm and length 45mm which is 4mm shorter than the old version one. It is made up of 6061 T6 Aluminium material with hard coating which is harder in strength and increase the smoothness in piston movement.
7.LOW GRAVITY SHOCK RETAINER
The shock comes with low gravity shock retainer(-3mm), but it has other type shock retainer(-1mm) as another option.
8.2 KINDS OF C HUB OPTION WITH 2 CASTER
It has 2 kinds of C hub with 2′ or 4′ deg selection, but it only comes with one kind in the kit and the other is another option part.
9.SERVO FLOATING MOUNT
The floating servo mount is combined of Aluminum 6061 T6 hard-coated material servo mount and 2.5mm carbon graphite plate. The servo installed with the floating mount will not affect the chassis twisting when in the steering and let the chassis rolling and with balance in left/right steering. Besides, it comes with longer hex screws and collars that can be mounted to 2nd desk directly to enhance the chassis hardness to adapt different track conditions.
10.ALLOY STEERING ARM
The double steering arm is made of 6061 T6 Aluminium material with stable steering.
11.LOWER FRONT AND REAR SHOCK TOWER
The front and rear shock tower is lower to work with shorter shock absorber to reduce the traction rolling which is especially useful in high traction track with better steering stability.
12.TWO SEPARATED 2ND DESK
Two separated 2nd desks that can be varied the twisting capability at front and rear separately. Besides, it includes the mounting posts to mount to 2nd desk directly to vary the hardness and twisting capability to adapt different track conditions.
13.FOAM BUMPER
The bumper is made of high density foam with high rebounce characteristic to protect the car kit body in large area in case of big crash.
14.ALUMINIUM 30MM AND 40MM FAN MOUNT
With option 30mm &40mm aluminium fan mount can be installed at chassis which is closer to motor the maximize the fan to dissipated the heat on the motor.
15.DRIVING SYSTEM
It is mid motor design with front and rear belt are the same and the pulley is installed at the center. With this design to ensure the driving power is balanced between front and rear tire without any power lost and can have better acceleration. Besides, it comes with alloy gear differental, front spool, universal CVD joint and high precision bearing.
16.SPUR GEAR, DIFF GEAR, PULLEY GEAR AND PINION GEAR
Spur Gear, Gear Diff and Pulley are all made of nylon material. For motor gear it is made by hard coated 7075 material.
17.ALLOY STEEL SCREW, BALL HEAD
It comes with grade 10.9 alloy steel screws and nylon mixed ball joint to reduce the friction cover on top of the ball cap.
18.ALUMINIUM 6061 T6 PART
All aluminum parts are made of 6061 T6 hard-coated material with better strength which is produced under high precision CNC machine.
19.ALLOY STEEL CVD AND CAMBER LINK
All CVD shaft, universal shaft, camber link, front and rear spool outdrive, anti-roll bar are made of alloy steel material to ensure the stronger strength and relability.
20.6PCS CARBON GRAPHITE PARTS
6pcs carbon graphite parts such as chassis, 2nd desk, suspension arm front and rear tower …etc are made of the top grade T700 carbon graphite material with the best strength and lifetime. Besides, the chassis are designed in symmetrical at center to make sure the left/right traction rolling is the same and to achieve to reduce the car kit weight.
Follow us on: